|
I did some looking and the 944 turbo had 23mm bars. There are two pair on Ebay for less than $20.00. I don't know if they fit a standard 944 torsion housing and hence a bug or not. They are probably 23.5mm the same as the T3 station wagon. The ones Kdanie is talking about would probably be to big for a bug even with a T4 motor unless you are doing out right racing.
The only 944 rear sway big enough for my needs is on the M30 conversion and is rare and mega expensive. Whiteline out of Australia has adjustable from and rear bars for torsion beam and Sb cars. The rears are about 25.4 mm is diameter, which is the diameter which I will be using. I may go with their front as well as it is also adjustable and the same diameter as the Swayaway bars. Both are expensive mainly due to shipping.
I was hoping to go with the 944 bars as a cheap alternative, but they just didn't have the size I want to run. Hope it helps.
|
November 28th 2002, 11:42
Hybrid Mode
