Question:slotting the maxx to look like 944 struts

[LOAF]

Superman,

Thanks for the reply..

I remember you mentioning the crash bolts in a similiar thread.. This seems the easiest way.. being the use the H&R or VW bolts...

Have +/- 1 degree, will this be enough when coupled with Topline Camber Plus bolts be enough? I will swing by the VW dealership hopefully they have the bolts.. I will let everyone know..
Alex

It should be just enough; if not, then the upper hole will have to be slotted (last resort method).

[LOAF]

Superman,

Saw this post over at Superbeetlesonly..
"That's cool, the post I listed is word for word (and part number) out of the official Volkswagen workshop manual for the A2 Golf/Jetta; page 10 of section 11.

Let me know what you find out, the number may have been changed or he didn't know it. BTW, I ordered mine a few years ago (with that part number) from a VW dealer."

I had the same result.. but the one thing that I can comment on is that he was looking at the 1303 parts.. The number he gave me was the OEM camber bolt number and nut.. (he was kind enough to actually do a print out.. If i can get this scanned might be helpful to all)

Part number N 010 340 4
Name Screw, hex. hd.
F 134 2000 001>> ???
Remarks M8X40

The nut
Part Number N 011 008 8
Name: Hex Nut
F 134 2000 001>> ??? unsure what this is.. maybe chasis number for 1303?
Remarks M8

Hope that helps.. and I will go back tomorrow and as for the A2 part. Which is what may be confusing those guys..
Alex

Sorry, I should have mentioned that this part number is for an A2 85-92 Golf/Jetta.

[LOAF]

LOL..
No problem..

Hopefully tomorrow I will have better luck
Alex

[TOW74]

LOAF,

Did you find the VW crash camber bolt. The reason why I'm asking is because I'm looking for the same bolt. Please let me know. Thanks, TOW74,

[LOAF]

Not yet.. wife was in labor and that took priority..

Should find out later on.. the service guy thinks he knows what I am talking about but that number seems to have dropped out of the system..

Alex