|
|
|
|
#1
January 30th 2006, 13:02
|
|||
|
|||
|
R&P
Hello- I am still trying to find out if the "Fox" rack is the same as the VW units- I know on my 74' that I have some unused bolt(threaded) holes where the rack should bolt in- I just wanted to know if the units were interchangeabel from model to model
I am going to the "WORK" of the change because I have a rust free and very good chassis and already have the 944 brake change installed, so while I have the body off and am doing the changes I know this has to be the best time to do the rack change!!- anyone who has any experience that would like to share would be appreaciated thanks to everyone nohair 
|
|
#2
February 12th 2006, 15:35
|
|||
|
|||
|
Help?
I am still trying to find out if the "Fox" steering unit is the same as the VW/Audi and would fit the SB(74') that I have - please if anyone knows I think it would help in the supply of R&P parts that would be available to the people that want to change over
thanks for all the time and knowledge that everyone gives Nohair
|
|
#3
February 14th 2006, 15:22
|
|||
|
|||
|
R & P Steering
If it is a R&P like this one in the pict. it will no fit a SB, it has to be a R&P from a early Audi80/passat and you have modify it to fit.
look in this tread It's a standard 1303 75' rack with good pict. http://www.germanlook.com/Forums/sho...highlight=rack here is all that you need no more or less on german ebay: http://cgi.ebay.de/Kaefer-1303-Cabri...QQcmdZViewItem Last edited by hammerbus; February 15th 2006 at 16:12.
|
 |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Hybrid Mode
