Wishbone suspension bolt on kit

MikeVW · #1 June 9th 2006, 00:44

Jason,

What size inner diameter tubing did you use for the the where the bushing is inserted and bolted to the bulkhead? Also what bushings did you use?

Thank,
Mike

**volkdent** · #2 June 10th 2006, 00:33

I'm sure it sounded good coming out of your head, but I just don't know what your asking. Are you talking about the bushings on the A arms?

Jason

MikeVW · #3 June 11th 2006, 23:12

Oops, I really sound like a retard when I don't proof read my posts. Yes I am talking about where the A arm mounts to the frame.

Mike

**volkdent** · #4 June 12th 2006, 00:29

The bushings are graphite impregnated polyurethane bushings designed for rear leaf springs for old American cars. The tubing is just machined to match the recommended ID OD for the bushings. If your getting serious about doing something, I can get the part number for them.

Jason

MikeVW · #5 June 12th 2006, 16:02

I am getting close to the design phase of my car. I want to figure out what rims I am going to use before I begin with the suspension. I would appreciate it if you could tell me the part numbers for the bushings.

Thanks,
Mike

**volkdent** · #6 June 13th 2006, 11:13

I'll be heading to the shop this weekend so I'll check them out then. I just hope I saved the boxes!

Jason

Panelfantastic · #7 June 13th 2006, 13:16

Going to the shop for more progress pics I hope!

Jeff-

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)