Bend pushrod on #4 intake

[zeroaxe]

Indeed, I have now updated my profile with my location

I will take a shot of the cam followers tomorrow, but am sure it is solids. I will go and measure the pushrods as well, as they are stock CT ones, and this might also add to the bend PR. And as I mentioned, the springs are stock too. Not helping is it?

I appreciate that you cant post any links here, but can I contact you via PM for more details?

Cheers!

Ps. Just a note about SSP website that you might feel bringing to attention of the web designer... There is a problem when one goes to the website, and view part/s, and leave the computer for a while. The session times out(which is understandable), however, the error message keeps on repeating via Windows popup messages. The problem is for example when one leaves the site 'open' and go to bed/not returning to the computer for a long time(to resume browsing later). I left the computer on once for two days or so before coming back to it, and there where so many pop-ups, that it actually cause my computer to crash! Silly me, not knowing the reason(blaming Windows as usual) re-visited the site and left it on again! Only this time I got back before the computer got 'overwelmed'. It had about 100+ popups though!

Sorry for the off topic addition to my post, but thought that it would help other (potential) vistors to Street Style and Power, or be of use to the web designer

[Moog]

Stock CT pushrods for Hydraulic tappets are 272mm, Standard 1300-1600 ones for solid lifters are 282mm, so you can't really get them mixed up as you can't even set the tappets!

No good PM-ing me tonight - i am off to Germany for the week at 5.00am tomorrow morning. I'm back next weekend, so we can talk then if you want.

Will pass on the info about the website, but didn't realise it does this. It doesn't seem to do it if i leave my home PC logged on to it? I'll let Bill our webby man know and see if he can tell me why.

A Bientot!

Moog