my punch buggy racer!

[punchbuggyracer]

aus im putting the early porsche bearing caps which arnt in my parts list because they didnt send them. the engine is a type 4 2litre kombie motor i got from ebay.
this is my 1303 front end. i grinded it right back and painted it with kill rust, readying the car for the big brakes.
front hubs and rear calipers, turbo 944 of cause.
front calipers and hand brake hard were. i have know idea why they sent the 944 hand brake lever????

[punchbuggyracer]

at closer inspection of front hubs whilst taking photos i noticed the difference between the "pair" of front brakes

1. i noticed the left one was year dated 89 part 20.892.00
and 88 part 20.4691.00
the right one was 85 part 20.4558.00
and 84 part 20.4557.00

2. this is what really racked me off the. left one was missing the "piston inserts"


ive tried to high light this one so you can see what "inserts" im talking about.

also the rubber seals are missing. i feel this auto dismantlers have really wasted my time and money and im going to fry them on there ebay feed back.

if some one can help me with the part numbers for this missing parts(piston inserts?), the rear hubs and the removable caliper brackets(for the rear) it would be a great help. as they are also parts left out.

[AusSuper]

german wreckers at rocklea might be useful for you...

[wrenchnride247]

Have you called the seller? They should replace the odd caliper. Those calipers have two different style pistons and seals. I went through the different seals issue before . Do a search in "brakes" for "rebuilds".

[AusSuper]

seen you in north ippy yesterday sometime, or the day before, pretty sure it was yesterday tho.

[punchbuggyracer]

Ha I only just Registered it on Tuesday and that has been its only outing. i need to tune it its running rough.

[punchbuggyracer]

Considering we both dont live in Ipswich we sure live close lives. I've got a type 3 shifter and short shifter plate on the way.

Well guess what Aus Super. German auto dismantlers 6 months later have posted the missing items over , after Richard from V-forced got me the missing parts .

In 2 weeks im going to checker plate (diamond plate?) the front floor infront of the drivers seat up to the front fire wall. I was going to cut out the section and leave 1-2cm around the edge to silicon and pop rivot it all down. Will i loose any strength from the seat mounts?

[punchbuggyracer]

I'm not working on weekends any more and now Ive got time to work on my car. So i installed my 5in Speco tacho. I love it, it makes me like my car so much more. The needle is very jumpy maybe Ive got dirty points?