center caps for cup 2's

[freekazoid]

Originally Posted by flat

You can take stock 944 rear spacers (about 22mm or so) and machine them down to about 10mm (I believe) and still keep them hubcentric. I have to check my notes on how thin you can get them, but this is what I did on the bus to fit the 17x9's.

Lanner

That sounds like a nice option. If you can check how thin they can be machined down that would be great.

EDIT: Looks like cb performance has spacers, although a little smaller than what I was looking for but they might just work. So I'm going to try those out.

[freekazoid]

We got the cb spacers on. Had to shave a little off the rear axle bolt/nut and might have to cut a little bit off the end of the speedo cable and/or shave a little off the back of the center cap. But other than that everything fits. There is a surprising amount of space for the back tires, not a lot but decent. I'll have to get some detail pic's.