Volksarama "Bonneville Bus" to become reality

[BOXROD]

In an effort to reduce costs and speed up construction time, I am searching for companies that would like to contribute to this build. In exchange for parts, labor, cash, or trades, your company can be associated with this high profile build. A logo on the bus, link on our website, and recognition in all magazine and web features would be your return. I anticipate this vehicle will catch the attention of all types of magazines and websites. Plus, the bus will be taken to many shows around the West and hopefullly be entered into the 2008 SEMA show. If you are interested, contact me at derek@volksarama.com or PM me with your phone #.

Parts needed:
Engine internals: , crank, rods, cam, lifters, heads, pistons/cyls, and all other long block parts
Engine externals: tin, alternator, pulleys, clutch/plate,
Ignition system: Distributor, ignition box, wires, coil
Fuel system: tank, pump, regulator, lines, fitttings
Oil system: cooler, filter, lines, fittings
Turbo system: intake, carb, exhaust, turbo, wastegate
Flush mount windows
Rubber and seals
Electrical system: wiring harness, battery, lights, starter, alternator
Sheetmetal body panels: front nose skin, pass. side rocker panels (in/out)
Safety equipment: harnesses, fire supression, racing suit, helmet,
Paint materials.
Steel tubing
Sheetmetal work
Interior work

Labor needed.
Interior work.
Electrical install

Contact me to donate anything. derek@volksarama.com. Thanks.............Derek

[BOXROD]

Please support the shops that support this project,
Let them know you saw them on Volksarama.
Go to http://volksarama.com/BonnevilleBuildup1.html to see what we still need if you want to get involved in this project
R/C Trans- (702)221-4363 - http://rctrans.com/ - rebuilt HD transaxle.
The Wagen - (702)699-wagn - sheet metal install
Sand Freak Fabrication - www.sandfreak.net - Safety cage/roll bars
KCW - http://www.kustomcoachwerks.com/ - body and paint labor, front beam, raised box, narrowed torsion housing
Type 2 Parts.com - http://www.type2parts.com/ - sheet metal repair panels
Chirco VW - http://www.chircoestore.com/catalog/index.php - Crow 3x3 safety harnesses, Crow gloves
Old Speed - http://www.oldspeed.com/ - 944 Porsche rear hubs, backing plates, calipers, cables etc.
Econo International Supply E.I.S - http://eisparts.com/Merchant2/merchant.mvc? - new bus nose skin
DPR Machine Shop - http://www.dprmachine.com/ - 84 mm C/W crankshaft.
Speedwerks - http://www.speedwerks.net/ - MSD 6AL box with soft touch rev limiter.
Engle Cams - http://www.englecams.com/index.php - Engle turbo camshaft
MOFOCO - http://www.mofoco.com/ - 050 heads, 42x37, dual springs, opened for 94s, fully ported and polished
Mooneyes - http://www.mooneyesusa.com/Store/index.php - complete set of moon disks with dzus fastner kit.
Big Wig Race Cars - http://www.bigwigracecars.com/ - A set of aluminum front door panels and kick panels
Bugpack - http://www.bugpack.com/ - chromoly H beam race rods, a set of race lifters, and a set of their straight cut cam gears.
Dynamat - http://www.dynamat.com/ - Sound and heat absorbing materials.
Dolphin Gauges - http://www.dolphingauges.com/ - ****pit gauges
EZ Wiring - http://www.ezwiring.com/ - complete wiring kits
Sway A Way - http://www.swayaway.com/ - HD race axles
Vee Dub Parts Unlimited - http://www.vwparts.net/ - 94mm long cylinders, 94mm Weisco pistons

[BOXROD]

Got a few more sponsors for the project this week.

DPR Machine Shop - http://www.dprmachine.com/ - donated one of their 84 mm C/W crankshafts. These guys always donate a crank to the Las Vegas VW Club raffle. These guys know how to support the hobby. Give them a call if you need parts for your botton end. Thanks Jose.

Speedwerks - http://www.speedwerks.net/ - Speedwerks decided they wanted in, so Noah conrtibuted a MSD 6AL box with soft touch rev limiter. Noah builds some super clean motors and can do any import engines including rotary. Thanks Noah

Engle Cams - http://www.englecams.com/index.php - I called up Engle and they tossed one of their cams into the motor. I've always run Engle cams and really believe in their products. Thanks guys.

I still have a bunch of stuff needed to make this happen. I you are interested in getting involved go to http://www.volksarama.com/BonnevilleBuildup1.html to see what we need. Thanks......................Derek

[BOXROD]

MOFOCO - http://www.mofoco.com/ - Roy at MOFOCO stepped up in a big way and offered up a new set of their 050 heads. 42 x 37 valves, dual springs, cut for 94s, and ported and polished !!!!. These heads should work awsome for a streetable/raceable turbo 2332. Thanks a bunch Roy for your support.