GermanLook Forums  

Go Back   GermanLook Forums > Technical Section > Transmissions

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #19  
Old April 15th 2008, 19:21
yetibone's Avatar
yetibone yetibone is offline
Registered User
 
Join Date: Aug 2002
Posts: 705
Ah, granny gear!

Yeah, some considerable changes would need to be made to either choice of transmission if you were to have a low-low first. For that, you would indeed be better with a Berg 5, since all the ratios would get changed to have a super-low first, a second gear you could start from a dead stop with, and a usable spread between each gear from second, up to fifth. By design, VW trannies have a stronger first gear.

A 914/901's magnesium intermediate plate would be a weak point offroading with a low-low first gear. The first gear's cogs are on the opposite side of the plate from the side that the other 4 gears are on. This design leaves first, and reverse gears supported by only one bearing essentially; the one in the intermediate plate. The other 4 gears are supported by the bearings in the back of the transmission case, AND the bearings in the intermediate plate. First gear is really not supported well enough to hold up to the amount of torque it could see in an off road environment, if it were a very low ratio.
__________________
Yetibone
'71 1302S 1.8
'73 1303S 2.3
'83 928S 4.7
Reply With Quote
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 15:59.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
© www.GermanLook.net 2002-2017. All Rights Reserved