#16
|
||||
|
||||
Carefull with those protruding bolt heads in your tranny bellhousing. They _may_ just hit the flywheel ring gear...
|
#17
|
||||
|
||||
Quote:
Quote:
also this week i changed the door pins on my passenger door, prepped both doors and rear valance and got a coat of reface on them so im pretty pleased |
#18
|
||||
|
||||
Oeps, must have read over that part...
Well, better safe than sorry |
#19
|
||||
|
||||
ive dont a bit more on my bug - but mostly filler work which is dull as fcuk! and messy....but gota be done....especially as i want to to be as stright as an arrow!
both doors and rear valance are now in reface and the passenger door has new door pins i noticed my origional door has an audi logo on it - shows how late it is :lol: decklid received the swiss cheese treatment also and is now ready for reface quick pic of the barrles and pistons....anyone have experience of the aa stuff? is it any good? also turned out the 2 litre heads i won on ebay were 1.8 heads.....which is nice! |
#20
|
||||
|
||||
also had the boxster S rear discs opened up to sit on the 944 hubs
discs have gone off for powdercoating. also rebuilt the a arms with new bearings etc and put together the spring plates with weltmeister bushes slowly but surely making some progress |
#21
|
|||
|
|||
how bout those Boxster discs at the rear. What it means "opened up".
You mean inside, so You can fit them on to the hub? Cool project by the way 8)
__________________
1967 Bug |
#22
|
||||
|
||||
yeah the hole in the middle has been enlarged 2mm iirc - to the same size as the 944 disc so it sits on the hub in the correct position (if you look closely at the hub there is a raised ring)
|
#23
|
|||
|
|||
Cool.
Does OG 944 4-pot caliper fits perfectly, or You've made some spacers, or You don't use them at all?
__________________
1967 Bug |
#24
|
||||
|
||||
il be running 996 rear calipers (same as boxster S) but the disc is the same diameter and thickness as the 944 turbo disc - however i think the offset is slightly different but again only a couple of mm so may require spacers for 944 tubro calipers
|
#25
|
||||
|
||||
well ive been working on the chassis this week to get it finished. ive shamelessly copied a couple of ideas off of another project build on here but as it ws one of the neatest installs ive seen it seemed silly not to!
The rear mounts worked a treat but needed 8mm spacers between the framehorn and cradle and this is the front mount welded together which was then trimmed and neatened up the shift rod was shortened 20mm and the underside of the chassis was closed up similarly to the other project build. Framehorns were clearenced for the Larger CV joints and kafer bar set up mocked up and the tabs welded in i only had 1 short and 1 long bar to do this as the rest is still being made i also ran the fuel lines its off to the blasters and powdercoaters next week, then the obttom is being gravitex'd and painted black (over the powdercoat) then i can start to think about building it up! |
#26
|
||||
|
||||
really nice work man...
keep it up love the welds and fab work Super Clean keep the pics coming Chris.
__________________
74 Std. GL 08 Vw rabbit 18 WR250R 07 Chevy 3500 Dually |
#27
|
||||
|
||||
Nice MIG welds! Love the install so far...keep it up! This forum is for helping everyone with their projects.
__________________
1970 T1 W/MassIVe 2913cc RAT/?EFI? w/direct fire (very soon) and 915 trans 1962 SC 1776cc SP 944NA brakes, 993 wheels VKG |
#28
|
||||
|
||||
Thanks for the comments guys
wrenchnride i dont think it would have been quite the same if i hadnt seen yours :lol: you've definately helped me!! i'm already thinking about going over to the porsche coupling instead of the beetle coupling lol! i wont be doing any work on it for a few weeks now as im moving house and changing jobs in the same week.....but when the chassis comes back il build it up and get it rolling - the body is booked in for paint in 10 weeks and i rekon ive got a couple of days tieing up lose ends on that before shes ready to go! thanks again Deano |
#29
|
||||
|
||||
Well with starting a new job and moving house theres not been any progress to speak of over the last couple of months, but today work started again, heres a sneeky peek of the rear end....
ive got my motivation back im going to dry build the car before paint - and ive got some mods to make so the paint date has been moved back a bit! |
#30
|
||||
|
||||
Cheeky shot, nice rear end you have there!
Jason
__________________
If I could just get paid for my sleepless nights.... 1960 VW Bug UBRDUB Walkaround 1st Drag Run Dyno Run Oval Ragster-'57 Rag/'04 Boxster S |
Currently Active Users Viewing This Thread: 3 (0 members and 3 guests) | |
|
|