944 turbo rear rotor dimensions <-86

[-Alex-]

No, i don't know the "178" dimension, thats my only problem Rest of i can measure and calculate from aluarm with caliper and hub. I just dont have any 944 rear rotor now. Yes, i found that 944 parking brake shoes fit also to many other porsche model.

According to this, they should fit 928, 993 etc.

http://www.9xx-parts.com/store/index...roduct_id=1481

[DORIGTT]

BMW E30 rear brake shoes are the same as the 944 from what I understand as well.

[-Alex-]

I am not looking brake shoes Only looking the diameter from inside rotor parking brake shoes are.

[-Alex-]

No one knows the inside diameter of rotor where parking brake shoes are? Or have rotor on the bench so could measure it?

[kombi211]

i just measured a set of rotors that I am getting to put on my square and they are right at 178mm inside DIA with 30mm contact area for the e brake shoes. but the rotor i have are off of a 996 vented and cross drilled not sure if that helps you

[1303C2/3]

They are 180mm inside diameter. The brake shoes are 25 mm in width. So 30 mm inside the drum should be ok. I m planning to use merc. W 211 T on 944 NA hubs. According to Brembo catalogue they have the same e brake dimensions. The merc disc is 300 mm dia and 22 mm thick.