GL 1303S project from Romania

[Xellex]

Recently I have moved my bug and most of my tools to a bigass garage that a friend of mine has rented. (also aircooled owner and fan) and I keep forgetting to take my camera with me when I go there to work on the bug. I'll try to remember. In the meantime I took a few pics with my phone:
The bellhousing is about 2,5cm off to the rear measured from the trans craddle. I forgot to measure the original one, so I don't know how it sits compared to orig. position.
The disc you see in there is the lada one, I was telling you about earlier.
The drive axles are not bolted to anything and that's why they sit so low.


And the gearshift lever. It was in pieces when I got it, and it was a pain to get it all assembled but I managed.


It's probably not the nicest install, but I only hope it's going to be functional.