|
|
|
|
#1
July 9th 2011, 16:33
|
|||
|
|||
|
The EBI Chimay weekend was superb, but now it is oval time again.
Al the old repairs are cut out of the donor front and today I started cleaning the underside of it. This is a very good piece of German metal.    Paul.
__________________
If some is good and more is better, then too much should be just about right! 
|
|
#2
July 16th 2011, 10:07
|
|||
|
|||
|
Finally did something visible again.
Complete parafan removed.  Took a wile to find the currage, but it had to be done.  Both doorpillars removed :shock: :shock:   Paul.
__________________
If some is good and more is better, then too much should be just about right!
|
|
#3
July 20th 2011, 15:14
|
|||
|
|||
|
a few holes.
Looked at an original , never welded body and then circled all the original holes. The rest has to be welded.  How it should be.  After storage for many years, this all original (only the exhaust cutouts are not original), rust free and never welded oval is my workshop neighbor. now i can check it if I need to know how things should be. (i am not aloud to touch it ;D)  Paul.
__________________
If some is good and more is better, then too much should be just about right!
|
|
#4
August 27th 2011, 16:09
|
|||
|
|||
|
Replaced the right windshield heater thing and repaired the left one.
  In the past someone drilled a lot of holes in this car, today I fixed it. This is a difficult to reach area, so while I was in there I might as well bare metal it.   Paul.
__________________
If some is good and more is better, then too much should be just about right!
|
 |
| Currently Active Users Viewing This Thread: 8 (0 members and 8 guests) | |
|
|
Hybrid Mode
