ej20t 1303 project

[vw1303]

Changed my spring plate setup to steel as the aluminum one I had made earlier the thread pulled out...

I trimmed the sharp edges off later.
Installed a mechanical oil pressure gauge as the electric one I had was giving me nightmares. Also installed LED oil idiot light and Innovate AF gauge.


Made an oil manifold that houses idiot light/oil pressure/oil temperature senders.

Played around with some quick release steering wheel hubs that a friend borrowed to me. I really liked the colour of the red ball release one but after I installed it I found it had too much play so I will be going with the splined one which was way better.


Going to pull the gearbox next weekend and install the spool

[effvee]

Hello, did you make all of the parts, even the Aluminum one?

[vw1303]

All parts are made by made except the rod ends. I CNC machined the torsion housing piece when I was studying mechanical engineering at BCIT. They are pretty beefy I think.