Bonze Main Bearings

[effvee]

Originally Posted by Type4Unleashed

I don't think it's necessary and I don't recommend it. And if you go with the Tool Steel Type 1 lifters, just leave them alone. They are not broke, so don't fix them.

And I have seen a couple sets of Type 1 lifters that went bad and it looked like it was because of the oiling hole ?

But if you have to have it done, any EDM shop can do it.

http://www.qualityedm.com/

http://www.manta.com/cmap/mryctbd/reliable-e-d-m

Hi Richard, well you know me, I'm still batting zero, but what the hay. With all of the oil pressure my oil pump will be capable of putting out having extra oil for lobs and rockers I don't think will hurt anything. My PSI regulator will be set for 80 I don't want that oil pump 33 or 35mm just bi-passing oil back into the sump. I'll have the lifter resurface for sure, thanks.