'56 rag with a twist

[fahrvergnugen]

Originally Posted by NO_H2O

Inching closer. Lots of nice work.

Yep, slowely where getting there, thanks

[fahrvergnugen]

After the innerwing was done, it was time to start with the Porsche front beam.

Porsche sheetmetal underneed the spare wheel well


When the car is finished it should not have rake. Now it has a 3,6deg rake, this is why the arm has to be 3,6deg. as well.


Bend and shaped 3mm steel tacked in.


The innerwing has to come out a bid to reinforce the a-arm mounting point.


Paul.

[fahrvergnugen]

As I told earlyer, I had to widen the innerwing a bit, so I had to try it with cardboard first.


When the cardboard fitted, I made it out of sheetmetal and welded it in.



Then I tack welded the Porsche bracket in place. I just had to try the shockabsorber.




Paul.