|
|
|
|
#2
March 2nd 2013, 09:27
|
|||
|
|||
|
The horn bracket had to move, no suprise what was under there.
 So a little repair was needed.  The right front suspension is ready (for now), so it's time to start doing it all again on the left side.   Paul.
__________________
If some is good and more is better, then too much should be just about right! 
|
|
#3
March 9th 2013, 09:14
|
|||
|
|||
|
Change of plans. I wasn't happy with the A-arm mounts I made in the spare wheel well, so I took out the grinder and started all over again.
No way back now.   Made a new spare wheel well bottom. I will make a lower part in the middle for the battery.    Paul.
__________________
If some is good and more is better, then too much should be just about right!
|
|
#4
March 13th 2013, 10:11
|
|||
|
|||
|
The new plan is getting shape.
 Paul.
__________________
If some is good and more is better, then too much should be just about right!
|
|
#5
March 23rd 2013, 08:42
|
|||
|
|||
|
Today I copied the right A-arm mount to the left.
 Now it's time to weld it, grind it and weld it in place. Paul.
__________________
If some is good and more is better, then too much should be just about right!
|
 |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Hybrid Mode
