996TT Wheels on Super with Kerscher Fenders?

[SuperRSi]

[QUOTE=-Alex-;85676]If nobody knows, try calculator, like i did.

That does not tell me anything other than how much wider the wheels are than the stock ones I haven't seen in 10 years, which a tape measure works well on. I do not have fenders anymore and will just wait until I bolt on the rear arms and wheels later this summer...

[-Alex-]

On my topic, there is everything to calculate and get the idea in theory

Simple mathematics only.

Stock wheel is 4,5" et34 and the usual empi 8-spoke is 5,5" et30, which fits well with stock fenders.

I dont know how much late 944 arms widen the rear, but this can be found somewhere here at germanlook. I think they widen 74mm total=37mm per side;

http://www.germanlook.net/forums/showthread.php?t=1993

http://www.1010tires.com/Tools/Wheel-Offset-Calculator

This is calculated with stock arms, you must add difference between with stock and late 944 arm width and possibly a spacer width.



Adding 37mm it gives these results:



I would also put 30-40mm thick spacer. No doubt the 11cm is best option to rear.

[Joel]

Originally Posted by -Alex-

Stock wheel is 4,5" et34

79 is 2 bolt suspension, all 2 bolt supers are et41
et34 was standards and the early 3 bolt supers.