My 66 chop top build

[Fiatdude]

Good luck getting the T4 engine and the G50 in there -- both are huge and longer than the T1 stuff you're replacing -- If I remember correctly the torsion tube and engine forks will require some messaging to get them into place -- The think last one I saw done, the guy did either a 1" or a 1.5" rise on the trans and engine to get some clearance for the trans between the forks and clearance for the exhaust system from the ground since the T4 exits the heads from underneath. And that required raising the floor in the luggage area for trans clearance... Trying to remember what else was done, but it has been a while --

Will be a really neat ride when you get done, You're doing a great job!!