|
well, all the seats need is a 12v positive and negative (ground) so you could find the stock porsche plug and wire it in from there, or just figure out whats the hot lead and whats the ground (should be two of both, one for front and one for rear adjustments) and make/buy your own plugs. I made my own out of some extra plugs I had in my watsons streetworks harnes. but make sure you have the power to the right wire or you will have your switch going in the wrong direction (like seats going up when your presing down).
hope this helps a bit... let us know how it goes!
later
-Jonathan
|
November 30th 2003, 18:07
Linear Mode
