Mythbuster: continuing project thread of my 1303 '75

[TSAF]

Wally maybe the Pauter ones might be the solution.

[Humble]

Damn, again? What kind of pushrods are you running and how long were you on the hardcut? I've spent a few seconds on the hard cut (500 rpm between soft @7500 and hard @8000) on longer straights so I'll have to watch that

[Wally]

Originally Posted by Humble

Damn, again? What kind of pushrods are you running and how long were you on the hardcut? I've spent a few seconds on the hard cut (500 rpm between soft @7500 and hard @8000) on longer straights so I'll have to watch that

Yeah, again indeed...
I am running Gene Berg pushrods, the good ones as the PR on the effected cylinder was still straight.
I was on the hard cut maybe only less then a second, so be aware that it isn't good for your engine's valve train.

[Wally]

Originally Posted by TSAF

Wally maybe the Pauter ones might be the solution.

Maybe, but my cam probably is not really suited for a Pauter cam and the extra valve lift does probably not clear the piston.
Oh, and I haven't got a set anymore...so if anyone...? ;-)