CUSTOM REAR TAIL LIGHTs

[Domer]

I'm thinking off customising a set of tail lights .
does anyone have any cool custom bug/body links? or even ideas of your own that I can work with.....like in bumper tail lights......stuff like that ......cool stuff

Thanx : Domer

[BWE]

Domer, LED's in the bumper... version 1.0. Next ones will be better mounted with smaller & brighter lenses. These have two banks each side, one for running lamps/brakes and one for turn signals. New setup will have same but with one bank being tail/brake and the other brake/turn.
cheers,
Dave

[volksdragon]

i used the flat lights on mine.

one word of caution they are not all created equal so check the quality before purchasing

http://www.germanlook.com/Html/Membe....php?RideID=96

[volkdent]

This is my take on LEDs to keep retro modern.

Jason

[Racelook]

Jason have you made that at your own??

Do you maybe have any making pics or pics when they are not in the lamphouses??

At first I wanted to make my own also.. I now going to use Hella-ones

Wiebrand

[volkdent]

Here you are Racelook. I had a place called TAP Plastics build the bases. They are made of 2 pieces of 1/4" clear red Lexan I think. They cut them out and glued them together for me, as the process is a little tricky, bubbles form between the 2 pieces. Then I trimmed the edges to fit it the houseing. I then marked the pattern I wanted and drilled holes with a smaller bit then a larger bit but not all the way through, so the LEDs have a stop. The outside are red, the center one is Royal Purple, a color I had to get from a company called Luxeon in Canada. I had to build the houseing for it to match the red LEDS. I don't remember the impedence, but then I figured out which resistors to use to have full power for brake and half power for running lights.

Jason

[Tedzbug]

Here are the ones on the bug i'm getting....

[Al B]

........something on a similar trip.........



Al B