glass-action

[effvee]

I have both fenders from CCC and Glass action and by far CCC is better. Glass action holes or dimples are not where they supposed to be, thus a wrongly drilled hole. The light bucket not seal properly, and just all around lesser quailty.

[oasis]

Well, CCC is disqualified on this GL project due to wrong and incongruent size offerings.

Glass-Action has received about a 50-50 response here and elsewhere. That makes it the second choice of my two Plan Bs.

Thanks to all who responded.

With all that has happened -- holiday, being out of town, being dependent on the schedule of others, poor weather, etc. -- I haven't driven my car in two weeks. Since it's not home with me, I can't even glance at it while on the crapper.

[CLKWRK]

Hey!

I bought my dash, floors and a set of bumpers from them about 4-5 years ago, no problems.

I just talked to them yesterday, i bought a set of speaker panels and a console. Nice peoples

Bry

[oasis]

This is one thread I started here and at three other forums. I typically pick what I think will be the best forum for whatever I intend to ask. Since I thought I was in a rush mode, I wanted as many answers and as soon as possible.

I didn't realize I was going to be in a hurry up and wait mode.

Anyway, the current tally for G-A including CLKWRK is 10-8 in favor of "for" G-A. Interestingly, one of the ten "for" and five of the eight "against" are hearsay -- making the tally 9-3 in favor of "for" from those who have had first-hand experience with them. This includes reports under their previous name and current name.

Don't get me wrong. I am not totally discounting the hearsay reports, and I am not discounting the "3" compared to the "9." (I seldom bid on anything at eBay if a seller has a 75% rating for example.)

I guess what I am saying is this co-Plan B is now demoted to Plan C. Demoted but not out of consideration. As I said, I'm anxious to get to the bottom of what exactly my choices are and what's involved in pulling them off.

[CLKWRK]

LOL,

sounds like you have a pretty complicated decicion making process going on there.

best of luck, Bry

[oasis]

, probably not. I tend to make things complicated. Sometimes the hardest thing for me to do is nothing.

[DORIGTT]

I only want to know why the chumps that make those Ghia parts can't make them out of carbon fiber! G-A told me that the workers they use aren't intelligent enough to do a run in carbon fiber for the bumpers and dash I want.

What's a Ghia-guy to do?