Project "Racelook"

[Kafer_Mike]

Much better... :agree: :agree:

[zen]

looks like you are making some good progress, even if frustrating. i too am getting ready to tackle hood pins for the c/f decklid i have. my plan is to just fab some brackets that will mount to the stock hinge and latch locations and tie the hood pins in there. so i can flip back to stock at any point needed (with the stock decklid with no holes of course).

i'm not sure how much easier that is really going to be, but will let you know.

keep up the good work. if you make it down to Atlanta, let me know so we can hook up.

[Racelook]

Thanks Guys

Had been working on the bug yesterday afternoon. I was planning to make an hole new dash by myself. That plan I still have, but is set back for an couple years now because the budget (which budget ?) don't let it.
So I started making an temporary dash.




Besides the switches there also will be signallights.

Wiebrand

[Steve C]

Hi

Make sure that you can see the speedo behind the steering wheel, this is a problem on 1303s with a smaller steering wheel.

Steve

[Racelook]

Thanks, I know that. I had an 350mm steeringwheel in my mind. But this was without any seats, so I don't know exactly where I come out in the future. But hell yeah this is only temperary.

Wiebrand

It will quite for the next 2 weeks, I'm going to china.

[GL-Aussielooker]

Hey RACELOOK --- any new progress. I need my daily update fix..

[Racelook]

I'm verry verry bussy this time. Have almost no time free. But have been working an couple of evenings in the last 2,5 months at my bug. Making my front bonnet rustfree. For most of the people this bonnet was good enough, but I had the front and back lip removed and almost welded in by now.

Will post when there's something to show.

Wiebrand