A few things

[gonebuggy]

The car was running PERFECT too. Everything was sorted out (so I thought )

Cip1 crank http://www.cip1.ca/ProductDetails.as...ode=C13%2D8180
Bruck flywheel:http://www.cip1.ca/ProductDetails.as...C%2DC10%2D5099

Pat and I assembled it.

I'll give Greg a ring,


Alex

[petevw]

I'm assuming you 2 didn't centerpunch the dowels. The dowels were in the crank when recieved?


Cip1 crank http://www.cip1.ca/ProductDetails.as...ode=C13%2D8180
Bruck flywheel:http://www.cip1.ca/ProductDetails.as...C%2DC10%2D5099

Ouch..... seeing those prices hurts. I paid a small fortune for my crank and flywheel. Well over 1K. Never mind the drive to Fisher Buggies in Florida, to pick it up!

What'cha doing for a replacement?

Pete

[gonebuggy]

Pete,

I'm about 8 months away from being a licensed machinist We didn't peen the dowels. They came like that, installed from the factory.

Not too sure yet on what I'll replace it with. Something bigger probably. Maybe a flanged unit


Alex

[big daddy]

Sorry to hear about your Crank Alex, I feel your pain you have worked so hard on your motor. Well this is a good time to plan to go bigger, if it's going to be more efficient and the same money. I wish I could help but ya know I am limited in that area.

Good Luck

[zeroaxe]

Originally Posted by petevw

I'm assuming you 2 didn't centerpunch the dowels.

Pete

Hey! Can you please explain what you mean by centerpunched? A pic will be nice too You know what they say about pics eh?

Thanks!

Wlex, sorry to hear about your misfortune. That sucks.

Cheers!

[67ghiaTIV]

Alex,

I think I have a stock exhaust at my parents place. I will check this weekend.

Jamie

[gonebuggy]

Jamie,

That would be great, send me pics and price if you find it.
Brampton eh? Have we met before? Drawing a blank on the name

Cheers,

Alex

[flat]

Sorry bro, the peening trick is dirty, very dirty. Can't you bump up to a 11/32 dowel and save the crank/flywheel?

Lanner

[gonebuggy]

Originally Posted by flat

Sorry bro, the peening trick is dirty, very dirty. Can't you bump up to a 11/32 dowel and save the crank/flywheel?

Lanner

I will save the crank one way or another, but am also toying with the idea of bumping the stroke up to 82mm I mean the crank has to come out anyways.... same old story lol Plus I may have a lead on some cheap IDAs...

Alex