adapting/machining drum to 5x100 brakes and wheels

[flat]

Thanks for the good word guys.

It is possible to redrill stock 4-130mm drums, and turn down the OD to match the VW rotor. Stud for M12 and it'll be gravy. The offset increase will be 6mm (thickness of rotor mounting face).Here's an idea of what I've done in the past:

It's pretty low-buck and the caliper bracket isn't too difficult to make to attach to stock drum backingplate holes.



It's pretty low-buck and the caliper bracket isn't too difficult to make to attach to stock drum backingplate holes.

Cheers,
Lanner