Mythbuster: continuing project thread of my 1303 '75

[dub_crazee]

Originally Posted by Wally

Hi (Rob, was it?),

Those are 986 (2.5 or some early 2.7) front calipers. No Boxster S as Boxster S (987) are actually the same as 996 and have 28mm thick front rotors! I have 24mm rotors in the rear, same as front 986. See?

On the front of my bug I now have 330x28mm and I use 996 front calipers for that. Originally 996 fronts are 318x28, but those calipers work very well on 330 too

Ah okay, 944T and 987 rear discs are also 24mm thick arent they? (but i beleive the 987 discs are slightly taller)

i am going to be running the 318x28 discs on the front. Did you find much of a difference going over to the 944 mastercylinder from the beetle mastercylinder?

its great learning from others' experiences on here, especially when the cars get used on the track

Thanks

Deano

ps did you ever run rear 996 calipers?

[Wally]

Sorry Deano

Originally Posted by dub_crazee

Ah okay, 944T and 987 rear discs are also 24mm thick arent they? (but i beleive the 987 discs are slightly taller)

Yes, they are, most all rear disks are 24mm I noticed; The hats are indeed taller/shallower with each model, so you need to check out what will work for you.

Did you find much of a difference going over to the 944 mastercylinder from the beetle mastercylinder?

Yes, 23mm or 19mm in the front will make a big difference. But even with the 944 master and mounting the lines so that 23mm is to the front brakes (thus lessening the brake power on the front), on MY car, the rear still didn't bite enough. Or in other words: I still leave braking power on the pavement, it can be better if my rears work harder.
Most all rear porsche 4-pot calipers (including the 996 ones) have something like 28/30mm cups in them. For MY car with 245 wide semi-slick tires, that is just too little I found. Even the 993 rears I had had the largest rear cups I could find (30/34) and even that was too small on MY car.
Notice I said MY car, as I am sure others will have different experiences with their cars wih different set-ups

I just hope to have solved the bias with the 36/40 cups in the 986 front calipers...I'll et you know how it turns out next (track-day) season